Where To Place Carbon Monoxide Detectors In Your Peoria Residence
Homeowners must protect against numerous risks like fire, flooding, and burglary. But what about something that you aren’t able to smell or see? Carbon monoxide creates a unique challenge as you might never know it’s there. Despite that, installing CO detectors can simply shield your loved ones and property. Learn more about this dangerous gas and where to place carbon monoxide detectors in your Peoria home.
What Is Carbon Monoxide?
Known as the silent killer as of a result of its absence of odor, taste, or color, carbon monoxide is a commonly found gas caused by the incomplete combustion of fuels. Any fuel-burning appliance like a fireplace or furnace may generate carbon monoxide. Even though you usually won’t have problems, difficulties can arise when appliances are not frequently serviced or appropriately vented. These mistakes may result in a proliferation of this potentially deadly gas in your interior. Heating appliances and generators are commonly responsible for CO poisoning.
When subjected to lower concentrations of CO, you may notice fatigue, headaches, dizziness nausea, or vomiting. Prolonged exposure to higher levels could result in cardiorespiratory failure, coma, and death.
Recommendations On Where To Place Peoria Carbon Monoxide Detectors
If you don’t use a carbon monoxide detector in your residence, purchase one today. If possible, you should have one on every floor of your home, and that includes basements. Here are a few suggestions on where to place carbon monoxide detectors in Peoria:
- Put them on each level, specifically in areas where you utilize fuel-burning appliances, such as fireplaces, furnaces, water heaters, and gas dryers.
- You should always install one no more than 10 feet away from bedroom areas. If you only have one carbon monoxide detector, this is where to put it.
- Position them about 10 to 20 feet away from potential CO producing appliances.
- Avoid affixing them directly above or beside fuel-burning appliances, as a small degree of carbon monoxide could be discharged when they start and prompt a false alarm.
- Attach them to walls at least five feet above the floor so they may sample air where occupants are breathing it.
- Avoid putting them in dead-air areas and beside doors or windows.
- Put one in spaces above garages.
Check your CO detectors routinely and maintain them according to manufacturer recommendations. You will typically need to replace units within five or six years. You should also make certain any fuel-consuming appliances are in in optimal working condition and have proper ventilation.